Automatic fish feeder pond fish feeder in Aquaculture STLZ-12V/Shrimp pond feeder

///Automatic fish feeder pond fish feeder in Aquaculture STLZ-12V/Shrimp pond feeder
Automatic fish feeder pond fish feeder in Aquaculture STLZ-12V/Shrimp pond feeder 2018-05-24T03:52:36+00:00

Project Description

Name:Automatic fish feeder pond fish feeder in Aquaculture  STLZ-12V

Automatic fish feeder pond fish feeder in Aquaculture instructions for use:

Name:Automatic fish feeder pond fish feeder in Aquaculture  STLZ-12V

Function Description:

The controller adopts industrial microcomputer control chip, stable operation, simple operation, safe and reliable; interval time (0-16 seconds), feeding time (1-16 seconds), vibration size and feeding area are adjustable, with timing, often On, automatic stop function.

Instructions:

  1. 3 seconds after the power is turned on to check the battery voltage, the power indicator “red” is on (the battery voltage is normal when it is on; if the red indicator is flashing, the battery voltage is low and the battery needs to be charged as soon as possible; when the battery voltage is low At DC9.5V, the controller will enter the battery over-discharge protection mode, automatically shut down, will not be able to start work!)
  1. After turning on the power for 3 seconds, if the “green light” of the work indicator flashes when the power is not turned on, the battery voltage is too high (the battery voltage is greater than DC16V). To protect the battery and the motor, the work cannot be started; Check whether the battery is correct and whether it is a 12V battery (the normal range of the controller battery voltage is: DC9.5V-16V)!
  1. Turn on the power, the power indicator “red light” is normally on, press the “start” button, the motor will start to accelerate for 1 second, then automatically return to the set speed, enter the normal working state. (It is recommended to turn the feeding area and vibration switch to a smaller one when starting the machine and reduce the starting load).
  1. Adjust the “interval”, “feed”, “vibration” and “loading area” corresponding knob settings apply to their own corresponding parameters;
  1. For “timed” feeding, just turn the knob to the corresponding time, and after the time arrives, the machine will automatically stop working;
  1. If you do not need to “timing” feeding, just adjust the timing knob to the “normally open” point and press the start key.
  1. In any state, if you want to stop feeding, just press the “Stop” button to stop.

Exchange parts1

Exchange parts 2

exchange parts3

Fish food feeder Specification:

Content\ModelSTLZ-12V
Electric Motor10-16W
Rotating Speed500-1400turns /min
Hopper80KG
Feeding Distance3-12mtrs
Suitable For Water Aera30-140M2
Max Feeding Capacity300kg/h
Feed Broken Percentage≤5%
Weight21kg
Ask for quote